medemagroup MC 1124 Child Service Manual page 56

Medema A/S
Service manual 2433-2028-S
Calf pads - angle
You set how tight the calf
pad should be to tilt, by
loosening or tightening
this pin screw.
Calf pads up/down.
Loosen the screw indicated
in the adjacent image.
Adjust and tighten again.
210 mm from top position to
lowest position.
Calf pads in/out.
Loosen the screw indicat-
ed in the adjacent image.
Adjust and tighten again.
40 mm from inner position
to outer position.
56 of 124
Lowest Highest
Version 2.0.2/2023