Table of Contents
Advertisement
3
In the interest of safety, please observe the following precautions
NEVER REMOVE THE BACK COVER
A part of high the voltage circuit is involved. A careless touch may cause an electrical shock.
PROTECT THE POWER CORD
Damage to the power cord may cause fire or shock hazard. When unplugged hold by the plug only
and remove carefully.
MAINTAIN GOOD VENTILATION
Ventilation slots and holes are provided on the top, rear sides and bottom of this unit. Place the unit on
a hard and level surface and locate at least 4 inches from walls to ensure proper ventilation.
NEVER INSERT ANY OBJECT INTO THE SET
Foreign objects of any kind inserted into this unit constitute a safety hazard and can cause extensive
damage.
DO NOT PLACE ANYTHING ON THE MONITOR
Heavy objects placed on the Monitor can cause damage or obstruct proper ventilation.
Do not place on this unit any receptacle such as a vase or glass which contains any liquid. Using this
unit with water or any liquid which might infiltrate into the unit may cause troubles such as fire and
electric shock.
DO NOT SUBJECT THE SET TO IMPACT OR MECHANICAL SHOCK
Take care not to give an impact to the set when you carry it.
Your attention is especially required for the CRT.
BE CAREFUL REGARDING MAGNETIC INFLUENCES
Drawing a magnet, speaker system, printer or floppy disk that will generate magnetism, near to the
display unit may cause blurred colors deformed. Your attention is called to this point.
DO NOT USE WRONG PLACE.
This unit is designed to be used in offices or households.
Please refrain from subjecting the unit to
vibration or where hydrogen sulfide or sulfur oxide generates.
Never place the monitor near or over a radiator, heat grill or in direct sunlight.
CARE OF THE CABINET
Unplug and clean with a soft cloth slightly moistened with a mild soap and water solution. Allow to
dry completely before operating.
Never use petroleum base solutions or abrasive cleaners.
Advertisement
Table of Contents
