Table of Contents
Advertisement
11
With the following special function equipped, this monitor can be used in versatile ways.
1 . Superimpose:
It is possible to superimpose RGB analog signal on a composite video signal, e.g. VCR, TV Tuner
etc ..
The method is as on the following 2 procedures:
a) Superimpose by feeding the composite video signal to the VIDEO INPUT and adding on thru the
25-pin terminal the RGB analog signal.
ANALOG INPUT
(D-5ub 25-pin)
SUPER-
RGB
IMPOSE
ANALOG
SIGNAL
COMPOSITE
VIDEO SIGNAL
VIDEO
INPUT
In this case, the composite video signal fed to
the VIDEO INPUT and the same signal from
Pin 11 of the ANALOG INPUT are used as
synchronizing signal for superimposing purposes.
b) Superimpose by inputting both RGB analog signal and composite video signal from the 25-pin
terminal.
\
+
• I
,
I
I
,
,-
--
SUPER-
IMPOSE-
'RGB
ANALOG
SIGNAL
SIGNAL
COMPOSITE
VIDEO
SIGNAL
In this case, either you short-circuit pins 8 and
21, or elevate pin 8 to high conditions.
Note: Please use the opt'onal (C) cable, Model SC-25F.
Refer to the typical connecting sample "B" on page 9.
Advertisement
Table of Contents
