Advertisement
rt]
ft Pause button
Press this button to stop CD
play temporarily.
Press the play button to resume CD play.
(2)
M Stop button
Press this button to stop CD
play.
© > Play button
Press this button to start playing the disc. !f pressed
when the disc tray is open, the disc tray closes and
playback begins. Pressing this button in the standby
mode automatically switches on the power and plays
the disc.
@
4 OPEN/CLOSE button
Press this button to open the disc tray. Press once to
open the disc tray forward, then press again to close
the disc tray. This button also operates in the standby
mode.
5]
>> PPI (automatic /manual search forward button}
Press this button to move the pickup forward to the
beginning
of the desired
track.
Press
in the
play,
stop,
or
pause
mode
to move
forward a number of tracks equal to the number of
times the button
is pressed.
* The automatic search function is set if button @ or
@ is released within 0.5 seconds, and the manual
search function is set if the button is held in for
more than 0.5 seconds.
* Buttons
@ and @ do not function
in the pause
mode.
6]
14444
{automatic/manual
search
backward
button)
,
Press this button
to move
the pickup
back to. the
beginning of the desired track.
Press in the play, stop, or pause mode to move back a
number
of tracks equal to the number
of times the
button
is pressed.
Disc tray
Compact
discs are loaded
to the disc tray.
REPEAT button
Press this button for repeat
play.
PROGRAM
Button
Use this button to play the desired tracks in the order
you
wish.
EDIT button
Press this button for edited recording
(dividing the
tracks to be recorded to fit onto sides A and B of a
tape according to the length of the tape).
TAPE A/B button
Press this button during editing to switch the display
between
the display of program
contents
for tape
side A and the display for tape side B.
RECEIVER DISPLAY
This lights to indicate
that the timer
is set.
Lights up when
signals are received from the
remote
control
unit.
This lights when
the station is tuned
in pro-
perly.
This lights when the timer is set.
© TIMER fH
EVERY/AUTO
TUNED
ONCE |MONO STEREO,
Ee h
ey
FAT
These
indicate the FM
reception
mode.
STEREO: Lights when
receiving stereo broad-
casts.
AUTO:
Lights when the auto mode
is set
with the MONO/ST
button.
MONO : Lights when the mono mode is set
with the MONO/ST
button.
These
light when
the timer
is operating.
@ RDS (Radio Data System)
When
the RDS
button
is pressed, a station is sear-
ched
for and
automatically
tuned
in, the
"RDS"
indicator lights and the station's name
is displayed
on the frequency
display.
e PTY (Program Type)
e TP (Traffic Program)
"TP" lights when an RDS traffic information station is
received.
Press
the RF ATT
button
to light the
display for local reception
only. The dis-
play indicates that the attenuator has been
placed
in the circuit.
Lights when a broadcast station is
to be preset.
This flashes for about 10 seconds
when the MEMO button is press-
ed during presetting.
12345)
cn
16 7 8 9 10;
MHz 144 12131415!
!; JU
\
at
11617
18 19201
DISC IN | 94 22 23 24 251
126 27 28 29 30,
Indicates
the
preset
number.
The
reception
band
(AM
or
FM),
frequency,
RDS
program and service name, the time and the timer are.
displayed
here.
NOTE:
e The"
© " of the timer standby display will not fight
up unless the current time and the timer have been
set.
Advertisement
