Table of Contents
Advertisement
Track that is currently recording or in recording standby
Empty track
Track that has previously recorded audio
❷
Input assigned to each track
INPUT A is assigned to track 1, and INPUT B is assigned to track 2 in the example above.
1.
Press
to stop recording.
2.
Press
on the Home Screen.
3.
Select the input to assign to each track.
Press the button to cycle through the input sources that can be assigned to the track.
Select input sources according to the connected equipment
Setting
NOTE
• Each INPUT can only be assigned to a single track. (An INPUT cannot be assigned to multiple tracks.)
• Phantom power will be supplied if
equipment that requires phantom power.
• Do not supply phantom power to equipment that is not compatible with it. Doing so could damage the
equipment.
Monitoring input/playback sounds
1.
Make input settings and connect equipment.
Use when nothing is connected (when not recording)
Use when connecting a guitar or dynamic mic to the INPUT A jack
Use when connecting a condenser mic to the INPUT A jack
Use when connecting a dynamic mic to the INPUT B jack
Use when connecting a condenser mic to the INPUT B jack
or
is selected. Select these when connecting
37
Explanation
Advertisement
Table of Contents
Need help?
Do you have a question about the R4 MultiTrak and is the answer not in the manual?
Questions and answers
I have bounced 2 tracks to make a bounce track and recorded some guitar on what is now track one...despite hearing playback to begin with dor some reason I now find that there is no sound coming out of any of the tracks. Can you point me in the right direction please