Making Preparations; Inserting Microsd Cards - Zoom R4 MultiTrak Operation Manual

Making preparations

An SD card is always necessary when recording.

Inserting microSD cards

1.
When the power is off, open the microSD card slot cover. Then, insert a microSD card with its
connectors facing down all the way into the slot.
To remove a microSD card, push it further into the slot and then pull it out.
2.
Close the microSD card slot cover.
NOTE
• Always make certain that the power is off when inserting or removing a microSD card. Inserting or
removing a card while the power is on could result in data loss.
• When inserting a microSD card, be sure to insert it with the correct orientation and side up.
• Recording and playback are not possible when a microSD card is not loaded in the R4.
• Always format microSD cards in order to maximize their performance after purchasing them new or
using them with a different device. (→
• The supported recording media are as follows.
microSDHC: 4 GB – 32 GB
microSDXC: 64 GB – 1 TB
Formatting microSD cards)
22