AEG FAVORIT 78002 VI User Manual page 8

8
Control panel
• The end of a washing program (the display shows a zero)
• The time of the delay start
• The alarm codes
• The activation and deactivation of the acoustic signals.
Delay start button
Press this button to delay the start of the washing program from 1 to 24 hours. Refer to
'Setting and starting a washing program'.
Program buttons
Press one of these buttons repeatedly to set a washing program. Each time you press the
button, the display shows a number that is related to a washing program. Refer to 'Washing
programs' chart.
Extra-Hygiene button
This function provides more hygienically clean dishes and glasses. During the last rinse, the
temperature increases to 70 °C and is kept above 65 °C minimum for 10 to 14 minutes.
Press this button to activate the function. The related indicator comes on.
The function can be activated with all washing programs but has effect only on some pro-
grams. To see where the Extra-Hygiene function has effect, refer to the 'Washing programs'
chart.
Multitab button
Press this button to activate or deactivate the multitab function. Refer to 'Multitab func-
tion'.
RESET button
Press this button to cancel a washing program in operation. Refer to 'Setting and starting a
washing program'.
Setting mode
The appliance must be in setting mode for these operations:
• To set and start a washing program.
• To set and start a delay start.
• To adjust electronically the level of the water softener.
• To activate or deactivate the rinse aid dispenser (only with the multitab function on).
• To deactivate or activate the acoustic signals.
Switch on the appliance. The appliance is in setting mode when:
• The display shows two horizontal status bars.
Switch on the appliance. The appliance is not in setting mode when:
• The display shows the time of the washing program or of the delay start.
– To go back to the setting mode, it is necessary to cancel the program or the delay
start. Refer to 'Setting and starting a washing program'.