13. WARRANTY ............. . . 20 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler –...
ENGLISH SAFETY INSTRUCTIONS Before the installation and use of the ap- Electrical connection pliance, carefully read the supplied in- WARNING! structions. The manufacturer is not re- Risk of fire and electrical shock. sponsible if an incorrect installation and use causes injuries and damages. Always •...
Page 4
• Do not keep the appliance door open without supervision to prevent to fall on it. • Do not sit or stand on the open door. • Obey the safety instructions from the manufacturer of the dishwasher deter- gent to prevent burns to eyes, mouth and throat.
ENGLISH 2. PRODUCT DESCRIPTION Top spray arm 2.1 Beam-on-Floor Upper spray arm The Beam-on-Floor is a light that shows Lower spray arm on the floor below the appliance door. Filters • When the program starts to operate, the red light comes on and stays on Rating plate for all the duration of the program.
3. CONTROL PANEL On/off button ExtraHygiene button Display Multitab button Delay button RESET button Program button (down) Indicators Program button (up) Indicators Description Salt indicator. It is always off while the program operates. Rinse aid indicator. It is always off while the program operates.
ENGLISH 4. PROGRAMS Program Degree of soil Program Options Type of load phases Prewash ExtraHygiene Crockery, cutlery, Wash 45 °C or 70 °C pots and pans Rinses Heavy soil Prewash Crockery, cutlery, Wash 70 °C pots and pans Rinses Normal soil Prewash Crockery and cut- Wash 50 °C...
ENGLISH 5. OPTIONS Activate or deactivate the op- 3. Start the shortest program with a tions before the start of a pro- rinsing phase, without detergent and gram. You cannot activate or de- without dishes. activate the options while a pro- 4.
10 www.aeg.com 6. BEFORE FIRST USE 1. Make sure that the set level of the 3. Fill the rinse aid dispenser. water softener agrees with the water 4. Open the water tap. hardness in your area. If not, adjust 5. Processing residues can stay in the the water softener.
Page 11
ENGLISH 2. Press and hold, at the same time, • The display shows the current set- ting of the water softener, e.g. until the indicators of = level 5. start to flash. Press again and again to change Press the setting. •...
12 www.aeg.com 7. DAILY USE 1. Open the water tap. 3. Load the baskets. 2. Press the on/off button to activate 4. Add the detergent. the appliance. Make sure that the ap- • If you use the combi detergent pliance is in setting mode, refer to tablets, activate the Multitab op- “Setting and starting a program”.
ENGLISH pliance continues from the point of inter- 2. Close the water tap. ruption. If you do not press the on/off button, the AUTO OFF function Cancelling the delay start automatically deactivates the ap- while the countdown operates pliance a few minutes after the end of the program.
14 www.aeg.com • Only use the appliance to wash items • Put the light items in the upper bas- that are dishwasher-safe. ket. Make sure that they do not move. • Do not put in the appliance items • Make sure that the spray arms can...
ENGLISH To disassemble the filter (A), pull apart (A1) and (A2). Remove the filter (B). Wash the filters with water. Before you put the filter (B) back, make sure that there are no residues of food or soil in or around the edge of the sump.
Page 16
16 www.aeg.com Problem Possible solution Make sure that there is not a damaged fuse in the fuse box. The program does not start. Make sure that the appliance door is closed. If the delay start is set, cancel the setting or wait for the end of the countdown.
ENGLISH 2. Press and hold, at the same time, Rinse aid dispenser off. until the indicators of Rinse aid dispenser on. start to flash. 4. Press to change the setting. 3. Press 5. Press the on/off button to deactivate • The indicators of the appliance and to confirm the set- off.
18 www.aeg.com 12. INSTALLATION Remove entire plastic There should be a minimum The hose s hould not be membrane from sink trap 2mm gap between the top of extended by more than spigot & fit drain hose to spigot the dishwasher and...
Page 19
ENGLISH Make sure that the local water authority gives you the average mains pressure in your area. In order to pass the safety valve through the kitchen cabinets, an opening of at least 45 mm x 90 mm is needed. Water drain hose The drain hose must be free of obstruc- tions.
Appliance cannot be re- tion, travel and delivery of the Appli- paired or it is uneconomic for ance to and from AEG or its ASC. If Electrolux, at its discretion, to re- you reside outside of the service...
Page 21
AEG and its ASC may apply. exchange information in relation to To the extent permitted by law, AEG you to enable AEG to meet its obli- excludes all warranties and liabilities gations under this warranty. (other than as contained in this...
Page 22
22 www.aeg.com Before calling for service, please ensure that the steps listed in point 13 above have been followed. SERVICE AUSTRALIA www.aeg.com/au FOR SERVICE or to find the address of your nearest state service centre in Australia PLEASE CALL 1300 363 664 OR EMAIL customercare@aegaustralia.com.au...