Table of Contents
Advertisement
5 Interfaces
5.8 Camera Link
The VisionBox AI has two Mini Camera Link connectors:
The Camera Link interface supports the following features:
•
Camera Link Dual-Base configuration:
o 2x Base / 1x Medium Camera Input
o 2x Serial communication interface
•
Camera Link Full / Deca configuration:
o 1x Base / 1x Medium / 1x Full / 1x Deca Camera Input
o 1x Serial communication interface
•
Camera Control signals (CC) can be controlled by software or by the RTCC.
A different FPGA firmware is used to select between Dual-Base and Full configuration.
Figure 13: Mini Camera Link connectors
IMAGO Technologies GmbH
Strassheimer Str. 45; 61169 Friedberg - Germany; Tel. +49 6031-6842611
info@imago-technologies.com;
www.imago-technologies.com
Page 19 / 21
Advertisement
Table of Contents
