Displayport; Usb-A 2.0; Usb-C 3.2 - IMAGO VisionBox AI Hardware Manual

Table of Contents

Advertisement

5 Interfaces

5.3 DisplayPort

Figure 7: DP connector

5.4 USB-A 2.0

The VisionBox AI provides two USB 2.0 Type-A connectors:
Based on the USB 2.0 specification, each port can deliver 500 mA.

5.5 USB-C 3.2

The USB Type-C connector provides SuperSpeed+ transfer mode (USB 3.2 Gen 2) with up to 10 Gbit/s.
The USB-C port can deliver up to 900 mA.
If a PC is connected to the USB-C port during power on, the VisionBox enters USB recovery
mode. This is indicated by a green blinking ON LED. Only use this mode if advised by IMA-
GO. Do not try to flash the Jetson OS image provided by NVIDIA!
The DisplayPort interface supports version 1.4a with a data rate of
32.4 Gbit/s. The maximum supported resolution is 8K60. To con-
nect the DP Port with a DVI or VGA monitor, an active adapter is
required.
Figure 8: USB 2.0 Type-A connector
Figure 9: USB Type-C connector
IMAGO Technologies GmbH
Strassheimer Str. 45; 61169 Friedberg - Germany; Tel. +49 6031-6842611
info@imago-technologies.com;
www.imago-technologies.com
Page 15 / 21

Advertisement

Table of Contents
loading

Table of Contents