Table of Contents
Advertisement
HOW TO
Do regular maintenance on the LGX® PRO and LGX® PRO 2.85
TAKE GOOD CARE OF IT
Every 6 months, or sooner if you have a higher than 15h per week average usage, perform the following maintenance operations:
1. With a tooth brush and alcohol:
a.
Clean the double gear and the drive gears
b.
Clean the needle bearings
2. With a fine brush and lubricant
a.
Lubricate the needle bearings
3. With compressed air
a.
Blow the housing plastic parts to remove dust and dirt particles
HOW TO GET HELP
We are available to help you with any questions or issues you may have. Simply go to our website where you can access our
customer support and send us your questions or follow the provided link:
https://www.bondtech.se/contact/#tab_technical-support-requests
www.bondtech.se
Page 7/8
Advertisement
Table of Contents
Need help?
Do you have a question about the LGX PRO and is the answer not in the manual?
Questions and answers