Replace The Pcba And Mount - Bowflex Max Trainer SE Service Manual

This document provides instructions for the replacement of the Printed Circuit Board Assembly (PCBA) on
NOTICE:
the BowFlex™ Max Trainer™ SE/SEi exercise machines.
If you need assistance, please call
purchased outside US/Canada). To find your local distributor, go to: global.bowflex.com
This icon means a potentially hazardous situation which, if not avoided, could result in death or
serious injury. Read and understand all Warnings on this machine.
BowFlex Inc., www.bowflex.com, 5415 Centerpoint Parkway, Groveport, OH 43125 U.S.A. - Customer Service: North America (800) 605-3369, cs@bowflex.com | out-
side U.S. global.bowflex.com | Printed in China | © 2023 BowFlex Inc. | BowFlex and the BowFlex logo are trademarks owned or licensed by BowFlex Inc., registered or
otherwise protected by common law in the United States and other nations. |
Important Safety Instructions - Before servicing or using this equipment, obey the following warnings:
This icon means a potentially hazardous situation which, if not avoided, could result in death or serious
injury. Read and understand all Warnings on this machine.
• Read and understand the Part Replacement Procedure before working on the machine. Failure to obey the
instructions and safety warnings could cause injury to the service technician or bystanders.
• Keep bystanders and children away from the product being serviced at all times.
• Disconnect all power to the machine before you service it.
• Make sure that the repair is done in an appropriate work space away from foot traffic and exposure to
bystanders.
• Disconnect all power and allow to sit for 5 minutes before you service this machine.
• Some components of the equipment can be heavy or awkward. Enlist the service of a second person when you do
maintenance steps involving these components. Do not try to do heavy or awkward steps on your own.
• Use only replacement parts and hardware that are supplied or approved by BowFlex. Failure to use BowFlex-
approved replacement parts can adversely affect the safety and functionality of the equipment creating a risk to
users and will void the warranty.
• Be sure that all warning stickers and instructional placards applied to the product stay present and in good con-
dition when doing maintenance or replacing components. If at any time the Warning labels become loose, unread-
able or dislodged, replace the labels. If purchased in US/Canada, contact Customer Service for replacement labels.
If purchased outside US/Canada, contact your local distributor for them.
• Do not try to change the design or functionality of the machine being serviced as this can adversely affect user
safety.
• Do not use the machine until all shrouds, instructions, warning labels and correct functionality have been verified
and tested for correct performance.
SAVE THESE INSTRUCTIONS
•
Tools Required (not included)
Short #2 Phillips screwdriver
14mm open faced wrench
Replace the PCBA on
the BowFlex Max Trainer
™
BowFlex Customer Service (if purchased in US/Canada) or your local distributor (if
SE/SEi machines
™
ORIGINAL DOCUMENT - ENGLISH VERSION ONLY
Standard screwdriver
67
Replacement Procedure
Skill Level: II
Estimated Procedure Time: 45-60
minutes
8031188.101523.A