BMW i7 Owner's Manual page 98

CONTROLS
The alarm system responds when movement
is detected in the vehicle interior.
The windows must be closed for the system to
function properly.
When the BMW Theater Screen is folded out,
movement in the rear is only detected to a lim-
ited extent.
Avoiding unintentional alarms
General information
The tilt alarm sensor and interior motion sen-
sor can trigger an alarm, although no unau-
thorized action occurred.
Possible situations for an unwanted alarm:
▷ In car washes.
▷ In duplex garages.
▷ During transport on trains carrying vehicles,
at sea or on a trailer.
▷ With animals in the vehicle.
The tilt alarm sensor and the interior motion
sensor can be switched off in such situations.
Switching off the tilt alarm sensor and
interior motion sensor
▷ Press the button on the vehicle key
within 30 seconds as soon as the
vehicle is locked.
The indicator light illuminates for approx.
2 seconds and then continues to flash.
▷ After turning off the standby state, an
option to turn off the interior motion sensor
and the tilt alarm sensor will be displayed
on the control display.
The tilt alarm sensor and interior motion sen-
sor are switched off until the vehicle is locked
again.
Ending the alarm
Unlock the vehicle.
If the vehicle is unlocked with the integrated
key, the drive-ready state must subsequently
98
Opening and closing
Online Edition for Part no. 01405A88D67 - VI/23
be turned on via the emergency detection of
the vehicle key.
Window
General information
When a window is frequently opened to the
same position, this task can be performed by
the BMW Intelligent Personal Assistant. This is
useful if you frequently use the same parking
garage, for example.
Additional information:
BMW Intelligent Personal Assistant, refer to
page 52.
Safety information
Warning
When operating the windows, body parts and
objects can be jammed. There is a risk of in-
jury or risk of damage to property. Make sure
that the travel path of the windows is clear
while opening and closing.
With the vehicle key
Opening windows
Press and hold the button on the vehi-
cle key after unlocking.
The windows open for as long as the button
on the vehicle key is pressed.
Closing the windows
With Comfort Access: press and hold
the button on the vehicle key after lock-
ing.
The windows close for as long as the button
on the vehicle key is pressed.