BMW i7 Owner's Manual page 257

4. "Driver Assistance"
5. "Parking"
6. "PDC signal volume"
7. Set the desired value.
Turning off the acoustic warning
Depending on the national-market version, the
acoustic warning can be switched off after the
start of the parking manoeuver.
Press the icon in the status field at the top
of the control display.
No audible warning is emitted during active
parking.
When the Park Distance Control is switched
on again, the acoustic warning is automatically
switched on again.
Visual warning
General information
The approach to an object is displayed on the
control display and in the instrument cluster as
soon as the system is activated.
Objects that are farther away are already dis-
played before a signal sounds.
Depending on the view, pathway lines, turning
circle lines and obstacle markings are shown
for a better estimation of the space required.
Depending on the equipment, the detection
range of the sensors is represented by shaded
annular surfaces. Green, yellow, and red mark-
ings indicate when obstacles are detected in
the detection zone.
If vehicle is equipped with Cross Traffic Warn-
ing: A warning is also shown on the display for
vehicles approaching from the side at the rear
and front.
To protect the sides of the vehicle, obstacle
markings are displayed on the sides of the ve-
hicle.
Online Edition for Part no. 01405A88D67 - VI/23
Parking
Display
Depending on vehicle equipment, warnings
may be displayed in front of, next to, and be-
hind the vehicle.
View behind vehicle.
View next to vehicle.
▷ Shaded area: detection range of sensors.
▷ Gray shaded area: no obstacles were de-
tected in the detection range.
▷ Colored marks in shaded area: obstacles
were detected in the detection range.
▷ Shaded area interrupted: the area next to
the vehicle has not yet been detected.
System limits
General information
The function for protecting the vehicle sides
only shows stationary obstacles that were pre-
viously detected by the sensors when passing
by.
The system does not detect whether an obsta-
cle moves later on. When the vehicle is station-
CONTROLS
257