BMW i7 Owner's Manual page 100

CONTROLS
Closing the windows
▷ Pull the switch to the resistance
point.
The window closes while the switch
is being held.
▷ Pull the switch beyond the resist-
ance point.
The window closes automatically.
Pulling again stops the motion.
Jam protection system
Principle
The jam protection prevents objects or body
parts becoming jammed between the door
frame and window while a window is being
closed.
General information
If resistance or blockage is detected while a
window is being closed, the closing will be in-
terrupted.
Safety information
Warning
Accessories on the windows such as anten-
nas can impact jam protection. There is a
risk of injury. Do not install accessories in the
area of movement of the windows.
Closing without the jam protection
system
In case of danger from the outside or if icing
might prevent normal closing, proceed as fol-
lows:
1. Pull the switch past the resistance
point and hold it there.
100
Opening and closing
Online Edition for Part no. 01405A88D67 - VI/23
The window closes with limited jam protec-
tion. If the closing force exceeds a specific
threshold, closing is interrupted.
2. Pull the switch past the resistance
point again within approx. 4 seconds and
hold it there.
The window closes without jam protection.
Window roller sunblinds
General information
The safety switch in the driver's door can be
used to prevent, for instance, children from op-
erating the roller sunblinds at the rear using
BMW Touch Command.
Safety information
NOTICE
When operating the roller sunblind, objects
stored on the rear shelf may damage the
roller sunblind. There is a risk of damage to
property. Make sure that the area of move-
ment of the roller sunblind is clear during the
operation.
Overview of rear doors
BMW Touch Command for operating the roller
sunblinds.