BMW i7 Owner's Manual page 267

Recording maneuver
1. Drive the vehicle to the starting point from
which a maneuver must be recorded and
stop.
2. Press the button.
The parking assistance systems view is
displayed.
3. "Record new path"
4. Drive the vehicle to the desired end posi-
tion.
The maneuver is recorded.
When recording a route, do not drive faster
than 9 mph/15 km/h.
While recording, the distance covered will
be displayed.
When the maximum distance covered or
the maximum speed is reached, a message
will be displayed and a signal tone will
sound.
5. With a stationary vehicle: "Save recording"
6. "Name:"
If necessary, enter the desired name for the
recorded maneuver.
7. "Save recording"
Do not move the vehicle until the recording
has been stored.
Performing stored maneuver
1. Drive the vehicle into the activation range
and stop. The control display and instru-
ment cluster indicate that a stored maneu-
ver can be activated.
2. : activate stored maneuver.
Green: after activation, the system takes
control of the vehicle and performs the ma-
neuver automatically. If applicable, follow
the instructions on the control display or in
the instrument cluster.
The speed can be reduced with the brake.
Other interventions will cancel the system.
Online Edition for Part no. 01405A88D67 - VI/23
Parking
At the end of the parking operation, selec-
tor lever position P is set.
Canceling the Maneuver Assistant
manually
The vehicle can be controlled manually during
an active maneuver by taking the following ac-
tions:
▷ Step lightly on the accelerator pedal twice
in succession.
▷ Step lightly on the accelerator pedal and
move the steering wheel slightly at the
same time.
▷ Depress the brake pedal and operate the
selector lever at the same time.
The Maneuver Assistant is canceled without
engaging selector lever position P. Driving can
continue immediately.
Canceling the Maneuver Assistant
automatically
The system automatically cancels in situations
such as the following:
▷ When the driver grasps the steering wheel
or takes over steering.
▷ When operating the accelerator pedal or
the selector lever.
▷ When the driver's seat belt is not fastened.
▷ With open cargo area.
▷ With open hood.
▷ With the doors open.
▷ During activation or intervention by driver
assistance systems.
▷ When the system limits of the ultrasonic
sensors and cameras are reached.
▷ When changing over to another function on
the control display.
▷ When the view on the control display is
overlaid with messages.
▷ In case of obstacles.
CONTROLS
267