BMW i7 Owner's Manual page 168

CONTROLS
Activating/deactivating welcome
light
1. Apps menu
2. "Vehicle"
3. "Exterior lighting"
4. If necessary, "Additional settings"
5. Depending on the equipment, select the
following setting:
▷ "Welcome and goodbye"
When unlocking the vehicle, individual
lighting functions are turned on.
▷ "BMW Iconic Glow"
The radiator grille lighting can only be
adjusted when the vehicle is stationary
and the drive-ready state is switched
off.
Turning on the welcome light
▷ Automatically on approach.
▷ During unlocking.
▷ Press the button on the vehicle key
with the vehicle locked.
Depending on the settings, the interior
lighting and parts of the exterior lighting will
be turned on.
The function is not available for the first
10 seconds after locking.
LED light carpet
The light source is located in the position indi-
cated.
168
Light and view
Online Edition for Part no. 01405A88D67 - VI/23
Keep the light source clean and unobstructed.
Pathway lighting
Principle
For the pathway lighting, the exterior lighting
turns on for a certain period of time after leav-
ing the vehicle in order to illuminate the area
surrounding the vehicle.
Switching pathway lighting on
▷ After switching off the drive-ready state,
briefly push the turn signal lever forward.
▷ Press and hold the button on the
vehicle key for approx. 1 second.
Setting the duration
1. Apps menu
2. "Vehicle"
3. "Exterior lighting"
4. If necessary, "Additional settings"
5. "Pathway lighting"
6. Select the desired setting.
Daytime driving lights
General information
The daytime driving lights illuminate when
drive-ready state is switched on.
Activating/deactivating daytime
driving lights
In some countries, daytime driving lights are
mandatory, so it may not be possible to deacti-
vate the daytime driving lights in front.
1. Apps menu
2. "Vehicle"