Press button P.
Parking brake
Setting the parking brake
Pull the switch.
The LED on the switch and the indica-
tor light in the instrument cluster are
illuminated.
Releasing the parking brake
With drive-ready state switched on:
Press the switch while stepping on the
brake pedal or selector lever position P
is set.
The LED and the indicator light go out.
The parking brake is released.
Parking
Make sure the parking brake is engaged.
Online Edition for Part no. 01405A8A608 - VI/23
On the road
QUICK REFERENCE
Light and view
Turn signal, high beams, headlight
flasher
Turn signal
▷
Flashing: press the lever past the resist-
ance point.
▷
One-touch signaling: lightly tap the lever up
or down.
▷
Brief flashing: press the lever to the resist-
ance point and hold it there for as long as
you want the turn signal to flashing.
High beams, headlight flasher
Press the lever forward or pull it backward.
▷
High beams on, arrow 1.
The high beams illuminate when the low
beams are switched on.
▷
High beams off/headlight flasher, arrow 2.
25