Installation instructions
Heat pump dryer
Models 12017–12019, 12029
The appliance should be installed by qualified personnel only.
Each step must be carried out and checked in full in the order specified.
Complete the installation of the appliance before plugging it in.
Fire hazard
Fire hazard! Models 12017–12019, 12029 contain the refrigerant R290, an environmentally friendly but flammable re-
frigerant. Keep open fire, ignition and/or heat sources such as burning candles, incense sticks, room heaters and the
like away from the appliances.
Check the appliance
Check the appliance for visible damage. Do not use the appliance if it is damaged in any way.
Keep all ventilation slits on the appliance clear and unobstructed, otherwise an adequate supply of air is not guaran-
teed.
During installation, it is imperative to observe the following
Check the following work steps in the sections specified. They show the most relevant points when installing the ap-
pliance.
B – Removing the installation plate
E – Fastening the drain hose to the appliance
1
2
H – Sliding in the appliance
3
4
1064356-13
C – Fastening the installation plate
1
F – Plumbing in
1
1064356-13
02/10/2023
2
3