Danby DDW1832ESS Owner's Manual page 10

OPERATING INSTRUCTIONS
SALT INDICATOR
(Not available in all models)
When there is insufficient softening salt, the salt
indicator will illuminate.
RINSE AID INDICATOR
When the rinse aid level is low, the indicator will
illuminate.
PROGRAM END INDICATOR
When the program is completed, the program end
indicator will illuminate and the buzzer will activate.
The buzzer will sound 5 times at 5 minute intervals
for a total of 4 times.
ULTRA-HOT END INDICATOR
At the end of a successful cycle, the indicator will
illuminate.
DELAY INDICATOR
When a program is selected with a delayed start,
the delay indicator will illuminate.
SHORT WASH INDICATOR
When short wash is selected, the associated light
will illuminate.
HOT DRY INDICATOR
When the hot dry option is selected, extra heating
and drying steps will be added to the selected
program and the associated light will illuminate.
UPPER HALF LOAD INDICATOR
This options is used when dishes are loaded into
the upper basket only and the associated light will
illuminate.
LOWER HALF LOAD INDICATOR
This option is uded when dishes are loaded into
the lower basket only and the associated light will
illuminate.
NOTE
If both the upper and lower baskets have smaller
loads, select the half load option for both baskets.
ULTRA-HOT INDICATOR
Raises the water temperature in the final rinse,
associated light will illuminate.
SILENT
When the silence option is selected, the associated
light will illuminate.
PROGRAM TIME INDICATOR
The programm duration can be monitored on the
appliance display.
CHANGING A PROGRAM
• Open the door and press the Start/Pause button.
• Choose a new program using the Program
button.
• Press the Start/Pause button and close the door
within 4 seconds.
The newly selected program will resume from the
point of pausing of original program.
NOTE
If 4 seconds is exceeded, the program will not
resume.
CANCELLING A PROGRAM WHILE RUNNING
• Open the door of the appliance. The selected
program will appear on the display.
• Press and hold the Start/Pause button for 3
seconds. "0:01" will appear on the display.
• Press the Start/Pause button and close the door
within 4 seconds.
The water will start to drain and continue for 30
seconds. When the program is cancelled the buzzer
will sound 5 times.
9