Technics RS-TR474 Service Manual page 6

RS-TR474 |
PLAYBACK
Either normal, CrO. or metal type cassettes can be used.
Deck 1.
1 POWER Press POWER.
Re (The unit will switch on.)
Press again to close the cassette
holder.
Forward side p—Reverse side
Tape opening facing downward.
When the cassette holder is open, pressing <q, >,
<q of DP will close the holder and begin the
desired function.
""pogynk- Press DOLBY NR to select
the appropriate noise-reduc-
tion system.
Each time the button is pressed, the indicators will
change in the order: [B] — [C] — off.
tS
Select the same type as that used for recording.
When playing back a tape which was not recorded us-
ing a Dolby NR system, press so that the indicators
go off.
4 REVERSE Press REVERSE MODE to
MCDE *
select the appropriate
reverse mode.
Each time the button is pressed, the indicator will
change in the order: <7 +> GD + Gx.
rs
= : One side only.
C2> : Both sides repeatedly (up to 8 times).
&xX> : Both sides, once only.
(Refer to page 7.)
[< ff Press > or <.
NE (Playback will begin.)
QU > : To begin from the forward side.
<q : To begin from the reverse side.
mr
Lt
~~ fone ea)
may
Ah
CAUORENQOESERRSOEREGRESOTSIRCTROT
"6 -0 -6€ -3 WS +2 +4
ROSDERSAGSODUQDODSDOSbacecaEsatE >
\Huminates Indicates the side being played.
To play back on Deck 2, in steps 2 and 5 above, press the but-
tons ( 2 and D ) for Deck 2.
To temporarily stop playback
(Deck 2 only)
Press ff.
The "PLAY" indicator will flash.
Press once again to resume playback.
To stop playback
Press .