Download Print this page

Technics RS-TR474 Service Manual page 4

Hide thumbs Also See for RS-TR474:

Advertisement

RS-TR474 |
Mi CAUTION
FOR AC MAINS LEAD
For (EB) area only
For your safety, please read the following text care-
fully.
This appliance is supplied with a moulded three pin
mains plug for your safety and convenience.
A5-ampere fuse is fitted in this plug.
Should the fuse need to be replaced please ensure
that the replacement fuse has a rating of 5-ampere
and that it is approved by ASTA or BSI to BS1362.
Check for the ASTA mark @> or the BS! mark Y on
the body of the fuse.
If the plug contains a removable fuse v2ver you must
ensure that it is refitted when the fuse is replaced.
If you lose the fuse cover the plug must not be used
until a replacement cover is obtained.
A replacement fuse cover can be purchased
from
_ your local dealer.
CAUTION!
IF THE
FITTED
MOULDED
PLUG
!S UN-
SUITABLE
FOR THE SOCKET
OUTLET
IN
YOUR HOME THEN THE FUSE SHOULD BE
REMOVED
AND THE PLUG CUT OFF AND
DISPOSED OF SAFELY.
THERE
IS A DANGER
OF SEVERE
ELEC-
TRICAL SHOCK IF THE CUT OFF PLUG IS
INSERTED INTO ANY 13-AMPERE SOCKET.
If a new plug is to be fitted please observe the wiring
code as shown below.
If in any doubt please consult a qualified electrician.
IMPORTANT
The wires in this mains lead are coloured in accor-
dance with the following code:
Biue:
Neutral
Brown:
Live
As the colours of the wires in the mains lead of this
appliance
may
not correspond
with the coloured
markings identifying the terminals In your plug, pro-
ceed as follows:
The wire which is coloured BLUE must be connected
to the terminal in the plug which is marked with the
letter N or coloured BLACK.
The wire which is coloured BROWN
must be con-
nected to the terminal in the plug which is marked with
the letter L or coloured RED.
Under no circumstances should either of these wires
be connected to the earth terminal of the three pin
plug, marked with the letter E or the Earth Symbol
alee
Sefore use
"nove the connector cover as follows.
4
Connector
cover
How to replace the fuse
1. Remove the fuse cover with a screwdriver.
Fuse cover
ae
ares
eer
) ners Saat
d a t e
B e c o
tt ge cesceesene
'
'
2 S&.
_ Fuse
(5 ampere)

Advertisement

loading