Do you have a question about the RS-TR333 - SCHEMATICS and is the answer not in the manual?
Questions and answers
AUBERT
May 4, 2025
comment changer le petit engrenage 106 sur Technics RS TR 333
1 comments:
Mr. Anderson
May 17, 2025
To replace gear 106 on the Technics RS-TR333 cassette deck, follow these general steps:
1. Unplug the unit: Ensure the device is powered off and unplugged to avoid electric shock.
2. Remove the outer casing: Use a screwdriver to remove the screws securing the top and possibly side panels. Carefully lift off the casing.
3. Access the tape mechanism: Identify the tape transport mechanism where gear 106 is located. You may need to remove additional screws or brackets to reach it.
4. Locate gear 106: Refer to a service manual or exploded view diagram to identify gear 106 precisely within the mechanism.
5. Remove the faulty gear: If the gear is cracked or stripped, gently remove it. This may involve removing a retaining clip or sliding it off a shaft.
6. Install the new gear: Align the new gear 106 correctly on the shaft. Ensure any clips or washers are reinstalled as needed.
7. Reassemble the unit: Reverse the disassembly steps. Reattach the transport mechanism, replace the casing, and secure all screws.
8. Test the deck: Plug in the unit and test tape operation to ensure the new gear works correctly.
Use caution when working with mechanical parts. If unsure, seek professional repair service.
This answer is automatically generated
Subscribe to Our Youtube Channel
Related Manuals for Technics RS-TR333 - SCHEMATICS
Need help?
Do you have a question about the RS-TR333 - SCHEMATICS and is the answer not in the manual?
Questions and answers
comment changer le petit engrenage 106 sur Technics RS TR 333
To replace gear 106 on the Technics RS-TR333 cassette deck, follow these general steps:
1. Unplug the unit: Ensure the device is powered off and unplugged to avoid electric shock.
2. Remove the outer casing: Use a screwdriver to remove the screws securing the top and possibly side panels. Carefully lift off the casing.
3. Access the tape mechanism: Identify the tape transport mechanism where gear 106 is located. You may need to remove additional screws or brackets to reach it.
4. Locate gear 106: Refer to a service manual or exploded view diagram to identify gear 106 precisely within the mechanism.
5. Remove the faulty gear: If the gear is cracked or stripped, gently remove it. This may involve removing a retaining clip or sliding it off a shaft.
6. Install the new gear: Align the new gear 106 correctly on the shaft. Ensure any clips or washers are reinstalled as needed.
7. Reassemble the unit: Reverse the disassembly steps. Reattach the transport mechanism, replace the casing, and secure all screws.
8. Test the deck: Plug in the unit and test tape operation to ensure the new gear works correctly.
Use caution when working with mechanical parts. If unsure, seek professional repair service.
This answer is automatically generated