Technics RS-TR474 Service Manual page 16

Hide thumbs Also See for RS-TR474:

RS-TR474 |

Procedure

1-25-11

Sub chassis

} "Connector holder \

1. Push the. drive.gear in the direction of arrow@.

4. Remove the sub chassis ass'y in the direction of arrow@.

2. Remove the 4 screws(@~@Q).

5. Remove the belt.

3. Release the 2 claws in the direction of arrow@, and then

Note: Care must be taken to remove the sub chassis ass'y

remove the connector holder in the direction of arrow@.

with tweezers that the belt is not applied with grease.

eRemove the 2 screws(@, @).

Mi HOW TO CHECK THE MAIN P.C.B.

1. Remove the cabinet. (See Ref. No.1 of the disassebly instructions.)

2. Remove the power transformer. (See Ref. No.3 of the disassebly instructions.)

3. Remove the rear panel. (See Ref. No.10 of the disassebly instructions.)

Table of Contents