Connecting To The Akaso Go App - Akaso V50 Pro User Manual

EN
basis. Reformatting erases all of your content, so be sure to offload your photos
and videos first.
19. Reset
Yes/No (Default setting: No)
This option will reset all the settings to the default values.
20. SD Card Info
This option allows you to check the card's used and remaining capacity.
21. About
This option allows you to check the brand, model, and firmware version of your
camera.

Connecting to the AKASO GO App

To connect your camera to the AKASO GO app, please download this app from the
App Store or Google Play to your smartphone first. When your camera is connected
to the AKASO GO app, you can control it to capture, or change the its settings using
your phone. You can also live preview, playback, download, edit, and share videos
via this app. Please follow the instructions below to connect your camera to the
AKASO GO app.
1. Turn on the camera, then tap on the Wifi icon in the mode menu or press the
Wifi button to turn on Wifi. The camera will enter Wifi mode and display the Wifi
information.
2. Turn on your phone's Wifi to enter the Wifi settings page, find the Wifi SSID in
the list and tap on it, then enter the password 1234567890 for connection.
Warm tip: Once the camera Wifi is connected, it will give you a "No Internet
Connection" or "Weak Security" notice since your phone's 4G signal is blocked.
You can ignore it and continue the app connection.
3. Open the AKASO GO app, tap "Device"→"Add Device", then pick "V50 Pro" from
the list for connection.
4. Tick "The above operation has been confirmed", and tap "Live Preview". Your
camera will be connected to the AKASO GO app.
18