Bissell CleanView Power Trak BAGLESS REVOLUTION 6591 Series User Manual page 6

Joe UDrne raps on the base of the Twist 'n Snap
dose Wltll tne corresponding no[cnes on rne hose
collar as shown,
I_ Turn the Twist 'n Snap Hoseto me nght to lock the
hose imo place.
Grasping the Quick Reach Handle, slide the end of
the Hose Wand onto the HoseWand Base. Snap the
Hose into the Hose Clip.
NOTE', T he Powerfoot will not operate
effectively unless the Hose Wand is
firmly attached.
O Slide the Extension Wand and the Crevice Tool
together into the storage clip as snown
Slidethe DustingBrush/Upholstery T oolinto the storageclip
asshown.
O AttachtheTurboBrush byaligningthe smallholesnear
the brushrollwith the tabs at the bottomofTurboBrush
housing.SnapTurboBrush into placeas shown.
SelectModelsOnly
= =
| floor cleaning. To prevent carpet |
|damage, do not lean on the vacuum or|
let the Powerfoot tilt forward.
CAUTION:
Before using your vacuum,
make sure that the Dirt
Container and Upper Tank are
in locked position and that all
filters (UpperTank, Pre-Motor
and Post-Motor) are in place.
Do not operate your vacuum
without these filters.
@