Bissell CleanView Power Trak BAGLESS REVOLUTION 6591 Series User Manual page 5

ThisUser's Guide hasbeendesigned to helpyou
getthemostsatisfaction fromyourBISSELL vacuum.
You'll f ind assembly andoperating ingructions,
safetyprecaddons, aswell asmaintenance a nd
troubleshooting inslructions. Please readthis Guide
_horoughly beforeassembling yourvacuumcleaner.
Payparticularattentionto the productdiagram,
assemblyinstructions, a nd part names.Locateand
organizeaJlparts beforeassembly. F amiliarize
yourselfwith the partsand wherethey fit. Following
this User'sGuidewill greatlyenhanceyourability
to get the most performance from your BISSELL
vacuumfor manyyears.
Theonlytool you'llneedto assembleyourvacuum
cleaneris a screwdriver.
Locate the vacuum Handle and remove me scre_
packet taped to the base of the Handle.
Stand the vacuum upright and slide the base of
the Handle firmly into the grooves at the top of the
vacuum body,
Check to be sure the Handle is fitted to tne vacuum
body. If there is a gap in front, continue to push firmly
until the Handle is flush.
O Insert the screw provided from the screw packet into
the existing hole. Tighten securely with a screwdriver.
k
0