Memory Operation; Memory System Operation; Memory Storage - Vertex Standard VXA-220 Operating Manual

The VXA-220 provides 150 user-programmable "Main"
memories, labeled "CH-001" through "CH-150," and
up to 100 pre-programmed memories, designated "Book"
Memories. The "
Memory Mode is activated.
The Main memories and "Book" Memories can be as-
signed alpha-numeric names of up to eight characters.

Memory System Operation

The VXA-220's Main Memory system allows the user to
store, label, and recall channel frequencies which you may
want to use frequently. You may store VFO frequencies,
Book Memory frequencies, and/or Weather Channel fre-
quencies (USA version only) into the Main Memory sys-
tem.
26
M
EMORY
" icon appears when the "Book"
O
PERATION

Memory Storage

Select the desired frequency in the VFO mode, or re-
call the Book Memory channel or Weather channel to
be stored in the Main Memory.
Press and hold in the
[ MW ( SPL-W )] key for
2 seconds. The memory
channel number will
blink on the LCD.
Within five seconds of
pressing the [ MW ( SPL-
W )] key, rotate the DIAL
selector knob to select the
desired memory channel
number for storage. In or-
der to prevent writing over memory channels, an "un-
derline" will appear under the hyphen (located be-
tween "CH" and the channel number) to indicate a
vacant memory channel.
Now press and hold in the [ MW ( SPL-W )] key for 2
seconds; you will now see blinking "A" on the LCD.
To attach an alpha/numeric
n a m e ( l a b e l ) t o t h e
memory, proceed to the
next step; otherwise press
VXA-220 P
RO
F
Press and hold
VI O M
PERATING ANUAL