Menu Listing - Vertex Standard VXA-150 Operating Manual

MENU Listing

A listing of the Menu items available via the SET
mode may be found below.
Menu
Function
Item
SQL Squelch Level Setting
MCLR Memory Channel Clear
RESM Scan-Resume Mode Setting
SCNL Scan Lamp On/Off
BEEP Keypad Beeper On/Off
RSAV Receiver Battery Saver
LAMP LCD and Keypad Illumination Mode
SFT CPU Clock Shift
PRTM Priority Checking Time
Select the
DWMD
Dual Watch/Priority Function
POBP Select the Power on Beep
LCD Select the LCD Display Readout
IMIC Internal Microphone On/Off
VXA-150 P V O
RO PERATING
M ( "S " )
ENU ET
SQL
Function: Squelch Level Setting
Available Values: 0 ~ 8
Default Setting: 2
Available
Default
Select a setting for this Menu item which just si-
Values
0 ~ 8 2
lences the receiver when no signal is present. Use
– –
the lowest setting which will keep the receiver quiet
CAR/5 CAR
on/oFF on
between incoming transmissions.
on/oFF on
oFF/ABS/ MCLR
1:1
1:1 ~ 1:5
Function: Memory Channel Clear
KEY/TGL/5 KEY
on/oFF oFF
To Clear a Memory channel:
05/10/15/ 15
20/25/30 ( 1.5 sec )
1. Select the Menu Item MCLR.
DW/PRI DW
2. Press the CHANNEL selector knob, then rotate
1/2/3/oFF 1
NOR/INV NOR
on/oFF oFF
3. Press the CHANNEL selector knob, then turn
4. Press and hold the CHANNEL selector knob for
Important Notice: An "erased" channel cannot be
restored, and "CH - 001" cannot be erased, as it is
used for "Priority Channel" operation.
M
ANUAL
M
ODE
the CHANNEL selector knob to recall the
memory channel to be erased ("SET xx" will ap-
pear on the display).
the CHANNEL selector knob one click to change
the display to "CLR xx".
2 seconds to exit.
31