Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for VALKYRIE Syn 240
Summary of Contents for VALKYRIE Syn 240
- Page 1 INSTALLATION GUIDE Valkyrie Syn 240/280/360/420/480 www.my-valkyrie.com...
- Page 4 AIO Water Cooling Parts 1x AIO water cooling radiator 1x Wire Kit & Hub Set 2 x with Valkyrie Syn 240 3 x with Valkyrie Syn 360 4 x with Valkyrie Syn 480 1 x with Valkyrie Syn 140 2 x with Valkyrie Syn 280...
- Page 5 1x Intel Backplate 4x Intel / AMD Bolts 4x Nuts 1x TF Card 4x LGA2011 Bolts 2x Intel Brackets 2x AMD Brackets 1x Nut Socket Fan screw Fan screw (extended) 120 x 4 / 140 x 4 / 240 x 8 / 280 x 8 120 x 4 / 140 x 4 / 240 x 8 / 280 x 8 360 x 12 / 420 x 12 / 480 x 16 360 x 12 / 420 x 12 / 480 x 16...
-
Page 6: Water Cooling
WATER COOLING... -
Page 7: Radiator Installation
Radiator Installation Step 1: Install fan Use the fan screws to secure the fan to the radiator. *Please use the shorter fan screws. DO NOT use extended screws to secure the cooling fan. Step 2: Install radiator Use the radiator screws to secure the radiator to the case. - Page 8 Intel LGA1200/1700 Installation We have marked the parts required for installing the Intel LGA1200/1700 platform for you. 1x Intel Backplate 4x Intel / AMD Bolts 4x Nuts 1x Nut Socket 2x Intel Brackets Step 1: Install backplate 1. Align the backplate to the corresponding platform holes. 2.
-
Page 9: Step 3: Install Brackets
Step 2: Install screws Install Intel/AMD bolts to the motherboard. *The larger end of the screw faces down. Step 3: Install brackets Put the brackets onto the bolts and tighten them with nuts using a nut socket. *You can install the water block in a different direction, if you rotate the brackets to 90 degrees. -
Page 10: Step 4: Remove The Protective Cover
Step 4: Remove the protective cover Take off the protective cover from the coldplate. *It is critical to the cooling performance. Step 5: Install water block Align the water block to the holes and screw it onto brackets. -
Page 11: Step 6: Complete Installation
Step 6: Complete installation Please refer to the “Wiring” for wiring. - Page 12 Intel LGA2011/2066 Installation We have marked the parts required for installing the Intel LGA2011/2066 platform for you. 2x Intel Brackets 4x Nuts 4x LGA2011 bolts 1x Nut Socket Step 1: Install screws Install Intel LGA2011 bolts to the motherboard.
- Page 13 Step 2: Install brackets Put the brackets onto the bolts and tighten them with a nuts using nut socket. *You can install the water block in a different direction, if you rotate the brackets to 90 degrees. Step 3: Remove the protective cover Take off the protective cover from the coldplate.
- Page 14 Step 4: Install water block Align the water block to the holes and screw it onto the brackets. Step 5: Complete installation Please refer to the “Wiring” for wiring.
- Page 16 AMD AM4/AM5 Installation We have marked the parts required for installing the AMD AM4/AM5 platform for you. 4x Nuts 2x AMD brackets 4x LGA2011 bolts 1x Nut Socket Step 1: Prepare the motherboard Screw out the 4 bolts. Remove the original bracket on the motherboard. Keep the original backplate.
- Page 17 Step 2: Install screws Install Intel/AMD bolts to the motherboard. *The larger end of the screw faces down. Step 3: Install brackets Put the brackets onto the bolts and tighten them with nuts using a nut socket.
-
Page 18: Step 4: Removing Protective Cover
Step 4: Removing protective cover Remove the protective cover from the coldplate. *It is critical to the cooling performance. Step 5: Install water block Align the water block to the holes and screw it onto brackets. - Page 19 Step 6: Complete installation Please refer to the “Wiring” for wiring.
- Page 20 WIRING...
- Page 21 Connecting Water Block to the Motherboard 1. Insert TF Card. 2.Connect the water pump 4PIN connector into the AIO_PUMP header on the motherboard. 3. Connect water block LCD to the USB connector on the motherboard. AIO_PUMP MOTHERBOARD ARGB AIO_PUMP CPU_FAN...
- Page 22 Valkyrie HUB Wiring 1. Plug the SATA power supply connector into the Valkyrie HUB POWER port. 2. Plug the 4PIN fan connectors and ARGB connectors into the Valkyrie HUB, respectively.* 3. Connect Valkyrie HUB control cables to MB_FAN and MB_ARGB ports respectively and plug the other ends into the CPU_FAN and AGRB headers on the motherboard.
- Page 23 EXSTENSION CORD FAN_01 FAN_02 FAN_03 MB-FAN ARGB ARGB ARGB POWER SUPPLY POWER SUPPLY SATA VALKYRIE HUB7 FAN_07 FAN_06 FAN_05 MB-ARGB ARGB ARGB ARGB MOTHERBOARD CPU_FAN CPU_FAN...
- Page 24 TIPS...
- Page 25 Method of replacing of water block trim strip The trim strip can be removed and replaced with your favorite style. *The trim strip of the Valkyrie Syn water block is also magnetic and interchangeable.
- Page 26 HW Gaming Solution Ltd 28 Oktovriou 261, View point Tower, 3035 Limassol, Cyprus info@my-valkyrie.com www.my-valkyrie.com VS_2.0_15042023...