Advertisement
Remote
control unit
:
|
TET
NE
PIONEER
Co
oo
@) POWER button
@ Function buttons
Uaubist ebe Sisveualsawerepnes mecansemmeeebet
Sets function to LD/VCR.
dasa
Sadivaaeecdet Sets function to PHONO.
Sets function to CD DIRECT.
@) DECK | operation buttons: Same as Deck | operation buttons
on the cassette deck amplifier.
@ TUNER STATION button
* Before operation, memorize broadcast stations in the STATION CALL
buttons.
TE cee as Sanceianiisinng a Stations change in order in the upward direction
=
Aisusntgae
ah owe Stations change in order in the downward
direction.
©) SOUND CONTROL operation buttons
ON/OFF:
Turns the sound image controller on and off.
CALL:
Recalls the preset equalizing curves (PRESET) and memorized
sound control (PROGRAM)
in sequence.
© VOLUME + (UP)/- (DOWN) button
When pressed, VOLUME
on the amplifier is actually moved by a motor.
@) SURROUND
button
Turns SURROUND
& STEREO
WIDE on and off.
Deck II operation button: Same as Deck II operation buttons
and
DECK
Il CONTROL
buttons
on the cassette
deck amplifier
(except MUTE).
@) CD operation buttons
Perform the connections so that the CD player is operated by the remote
control unit.
BWasddneteaeueeden vee Play
s llete alee scbesende
DISC selection
cutee stceasbicewoanses Stop
.... Pause
Seikventey Track search
Note that the DISC selector button on the remote control unit may not
operate, depending on the CD player used.
Timer operation buttons
SLEEP:
Sets the sleep timer.
WAKE-UP:
Timer
playback
setting/cancellation
can
be performed
when the timer playback time has been set. This is shown
in the tuner display section.
SNOOZE:
Turns off power if pressed after timer playback begins.
Timer playback begins again approx.
5 minutes later.
The amplifier input selector automatically switches to the music source
being operated when you press the CD playback {® ), cassette deck
playback («€, ® ), or tuner station controls.
NOTE:
It is not possible to operate the CD player with the remote control unless
the control cord is connected.
Range of remote control
Remote sensor
window
When
the remote
control
unit is pointed
at the remote
sensor
window on the amplifier section and any of its buttons is pressed,
the tuner and other components can be operated by remote control.
Distance:
Within a range of approx.
7 meters
(23 feet) from the
remote sensor window.
Angle: Within approx.
30 degrees from the center of the remote
sensor window.
Remote control will not be possible if there is an obstacle between
the remote control unit itself and the remote sensor window.
Performance of the remote control unit is adversely affected in the
presence
of strong
fluorescent
light.
Keep
such
lights away,
especially from the sensor window.
593
Advertisement
