Table of Contents
Advertisement
DXS-3410 Series Layer 3 Stackable Managed Switch Hardware Installation Guide
LED
MGMT (Link/Act)
(Out-Of-Band port)
Stack ID
LED
Link/Act
(10GE RJ45 ports)
Link/Act
(10GE SFP+ ports)
Link/Act
(25GE SFP28 ports)
The LED behavior during the booting or rebooting process is outlined as follows:
1. The Power LED exhibits a steady green light upon powering on until the system is ready.
2. All data port LEDs (including RJ-45 and fiber ports) will emit a simultaneous green or amber solid light once,
then turn off until the system is ready.
3. The 7-segment LED will illuminate with all segments upon powering on until the system is ready, while other
LEDs remain inactive.
Color
Status
-
Off
Green
On (Solid)
On (Blinking)
Amber
On (Solid)
On (Blinking)
-
Off
Green
This 7-segment LED can display numbers from 1 to 9 and the following
letters: H, h, E, and G. The stacking ID (ranging from 1 to 9) can be
assigned manually by the user or automatically by the system.
H - The Switch functions as the master Switch within the stack.
h - The Switch serves as the backup master Switch within the stack.
E - Displayed if an error is detected during the system's self-test.
G - Displayed when the Safeguard engine enters the exhausted mode.
Color
Status
Green
On (Solid)
On (Blinking)
Amber
On (Solid)
On (Blinking)
-
Off
Green
On (Solid)
On (Blinking)
Amber
On (Solid)
On (Blinking)
-
Off
Green
On (Solid)
On (Blinking)
Amber
On (Solid)
On (Blinking)
-
Off
Description
Fan is operating normally
Active 1 Gbps connection through the port
Data transmitted and received through the port
Active 10/100 Mbps connection through the port
Data transmitted and received through the port
Inactive connection, no link present, or port disabled
Description
Active 2.5/5/10 Gbps connection through the port
Data transmitted and received through the port
Active 100/1000 Mbps connection through the port
Data transmitted and received through the port
Inactive connection, no link present, or port disabled
Active 10 Gbps connection through the port
Data transmitted and received through the port
Active 1 Gbps connection through the port
Data transmitted and received through the port
Inactive connection, no link present, or port disabled
Active 25 Gbps connection through the port
Data transmitted and received through the port
Active 10 Gbps connection through the port
Data transmitted and received through the port
Inactive connection, no link present, or port disabled
4
Advertisement
Table of Contents
