Setting procedure
1
Open the scanner driver's setting screen.
2
Open the [Error Detection] tab.
3
Select either the [Detect by Length] or the [Detect by
Ultrasonic] check box (or both).
4
To also use the double feed detection ignore function,
open the [Others] tab, select the [Rapid recovery system]
(See p. 73)
check box, and click the [Setting] button.
The [Rapid Recovery System Settings] dialog box opens.
5
Select [Show a continue dialog and stop scanning], and
click the [OK] button.
If [Notify an error and continue scanning] is selected, feeding
does not stop when double feeding is detected, but it is notified
by the scanner's buzzer or LED.
50
Hint