Returns And Disposal; Declaration Of Decontamination; Disposal - Optek TF16 Instruction Manual

2

Returns and disposal

2.1

Declaration of decontamination

For the safety of our employees and because of legal regulations we need a
signed "declaration of decontamination" before your return can be handled.
This signed declaration must be included with the shipping documents on the
outside of the packaging.
Any returns which were exposed to hazardous substances and were not
professionally decontaminated are not accepted and will be sent back on your
cost.
optek's declaration of decontamination and contact information can be found on
our website www.optek.com.
2.2

Disposal

Special legal regulations apply to the return and disposal of industrial waste
equipment. However, manufacturer and user can contractually agree on which
party is to fulfill these legal obligations.
Observe current national disposal regulations.
To dispose packaging material, please separate materials into the following
groups:
For disposal, disassemble the system components and separate them
according to different material groups.
Dispose of materials according to national and local regulations.
If no agreement has been made, products may be shipped to optek for disposal.
• Paper / paperboard
• Plastic
optek-Manual--1004-2006-02--TF16-US-2011-06-20
www.optek.com
- 3 -
Returns and disposal