Trouble Shooting Guide - Venturer PVS122B Owner's Manual

SYMPTOM
No power.
The remote
does not
function.
DVD
No sound or
only a very
low-level
sound is
heard.
No picture
The picture is
not clear
Severe hum or
noise is heard.
The disc does
not play.
Need
DO NOT RETURN THIS TO THE STORE
More
Please call Customer Service at 1-800-252-6123
Help?
or visit online help at http://Www.18002526123.com
Printed in China

TROUBLE SHOOTING GUIDE

CAUSE (AND REMEDY)
• Check that the AC adapter is connected.
• You did not turn on the unit.
• Remove any obstacles between the remote and the unit.
• Use the remote near the unit.
• Point the remote at the remote sensor on the unit.
• Replace all the battery in the remote with new ones.
• Make sure that you've select DVD mode.
• The system is in pause mode. Press the
to normal play mode.
• Fast forward or fast reverse is performed. Press the
button to return to normal play mode.
• Make sure that AUDIO / VIDEO output connections are correct.
• The DTS DVD disc cannot be decoded to have speaker output.
• This unit is too hot, shut off the unit for 30 minutes to cool down.
• The region number of the disc doesn't match the region number
of this unit.
• Clean the disc.
• The disc is scratched.
• The plugs and jacks are dirty. Wipe them with a cloth slightly
moistened with alcohol.
• Clean the disc.
• There is no disc inside ("No Disc" appears on the screen).
• Insert the disc correctly with the playback side facing down.
• Clean the disc.
• A non-NTSC disc has been inserted. The unit and disc region
number are incompatible.
• Condensation may have formed inside the unit due to a sudden
change in temperature. Wait about an hour for it to clear and try
again.
E - 32
PLAY button to return
PLAY
811-122B91-051