Bissell POWERFORCE HELIX 3313 Series Manual page 3

Assembly (continued)
4.
Insert end of hose into back
of vacuum and twist right to
lock into place.
Using Your Vacuum
1.
Turn ON ( ) vacuum using
power ( ) pedal and lean
back using recline pedal. When
finished, press pedal switch
again to turn OFF ( ). Return
to upright position.
Note: Some frieze and Berber carpets have long delicate fibers or threads that may be damaged by
rotating brush. Repeated strokes in the same area may enhance this condition.
Emptying the Dirt Tank
1.
Press the tank release button
and pull handle to lift dirt tank
away from vacuum.
5.
Wrap hose through hose
clip and connect hose wand
to the foot hose at bottom of
vacuum.
2.
Press the handle recline
pedal to lean your vacuum
back. Press pedal a second
time to recline further. When
finished, lean vacuum all the
way up to lock it into upright
position.
2.
Holding dirt tank over a trash bin, press release button on
back to open tank and dump debris.
Snap bottom back into place when empty.
6.
Attach desired tool.
The crevice tool is stored
inside the extension wand.
3.
Vacuum can be raised or
lowered to adjust to different
types of flooring. Turn knob
towards desired flooring type.
If vacuum becomes difficult to
push, move to a higher setting.
BISSELL.com 3