Yamaha Tenere 700 2023 Owner's Manual page 27

To switch the instantaneous fuel con-
sumption settings, push and hold the
bottom set button until the display
changes.
TIP
When traveling under 20 km/h (12
mi/h), "_ _._" is displayed.
TIP
The instantaneous fuel consumption
function should be used for general
reference only. Do not use this figure to
estimate the distance that can be trav-
eled on the current tank of fuel.
Average fuel consumption display
EAU87790
1. Average fuel consumption display
This display shows the average fuel
consumption since it was last reset.
The average fuel consumption display
can be set to either "AVE_ _._ km/L" or
"AVE_ _._ L/100 km", or "AVE_ _._
MPG". To switch the fuel consumption
measurement units, push the top set
button until the measurement units
change.
 "AVE_ _._ km/L": the average dis-
tance that can be traveled on 1.0 L
of fuel.
 "AVE_ _._ L/100 km": the average
amount of fuel necessary to travel
100 km.
Instrument and control functions
 "AVE_ _._ MPG": the average dis-
EAU90691
TIP
 To reset the average fuel con-
 After resetting, "_ _._" is shown
1
Coolant temperature display
1. Coolant temperature display
This display shows the coolant tem-
perature from 104 °F to 242 °F in 1 °F
increments.
4-9
tance that can be traveled on 1.0
US.gal of fuel.
sumption, select it and while the
digits flash, push the bottom set
button until it is reset.
until the vehicle has traveled some
distance.
1
4
EAU90710