Yamaha Tenere 700 2023 Owner's Manual page 24

Instrument and control functions
Clock
4
1. Clock
The clock uses a 12-hour time system.
TIP
When the main switch is turned off, the
clock can be viewed by pushing the
top set button.
To set the clock
1. Push both the bottom set button
and top set button until the hour
digits start flashing.
2. Use the bottom set button to set
the hours.
3. Push the top set button and the
minute digits start flashing.
4. Use the bottom set button to set
the minutes.
5. Push the top set button to confirm
EAU90780
the settings.
1
TIP
When setting the hours and minutes,
push the bottom set button briefly to
increase the increment value one by
one, or push and hold the button to in-
crease the increment value continu-
ously.
Transmission gear display
1. Transmission gear display
2. Neutral indicator light "
This display shows the selected gear.
The neutral position is indicated by "–"
and by the neutral indicator light.
OFF-ROAD Indicator
EAU87391
1. "OFF-ROAD" indicator
2. ABS OFF indicator light "
This indicator comes on when the ABS
1
has been manually disabled.
To switch off the ABS
1. Turn the vehicle power on.
2. The vehicle being stationary, push
2
"
3. The ABS OFF indicator light and
4-6
"
ABS
the "OFF-ROAD ABS ON/OFF"
button until the ABS OFF indicator
light starts flashing, then release
the button.
"OFF-ROAD" indicator will come
on simultaneously.
EAU90833
1
2