Front Seats - Dodge SRT VIPER 2014 User Manual

FRONT SEATS

Power Seats
• The power seat switches are located on
the outboard side of the front seat cush-
ions.
• The power seat switch controls forward,
rearward, up and down adjustments. Push
the switch forward, rearward, up or down
and the seat will move in the direction of
the switch. Release the switch when the
desired position has been reached.
• The recline switch controls the angle of
the seatback. Press the switch forward or
rearward and the seatback will move in
either direction.
Manual Seats
Forward/Rearward
• Lift up on the adjusting bar located at
the front of the seat near the floor and
release at the desired position. Then,
using body pressure, move forward and
backward on the seat to be sure that the
seat adjusters have latched.
Recliner
• Lean forward in the seat and lift the
recliner lever, then lean back to the de-
sired position and release the lever.
• Lift the lever to return the seatback to an upright position.
Height Adjustment
• Ratchet the front lever, located on the outboard side of the seat, upward to raise the
seat height.
• Ratchet the lever downward to lower the seat height.
Do not place any article under a power seat or impede its ability to move as it may cause
damage to the seat controls. Seat travel may become limited if movement is stopped
by an obstruction in the seat's path.
GE T T I NG START E D
CAUTION!
17