Prior To Installation - Fisher & Paykel VB60SMB1-SET Installation Manual

INSTALL THE AIR FILTER
locking cap
1
2
holder
air filter
3
4
air filter cover

PRIOR TO INSTALLATION

Pull out the locking cap with pliers.
Insert the locking cap in the holder.
Use a slotted screwdriver to screw the
air filter into the air filter opening.
Slide the air filter cover over the air filter
opening.
REMOVE THE TRANSIT SCREWS
The transport screws must be removed before starting up for the first time to avoid damage
to the drawer.
power cable
holder
transport
screws
INSTALL THE ANTI-TIP BRACKETS
The anti-tip brackets prevent the drawer from tipping over when opening the drawer. Do not
open the drawer if the anti-tip brackets are not installed.
Unscrew the transport screws from under
the power cable and holder.
Locate the attachment position of
the anti-tip brackets in both sides
of the cabinetry,
Ensure the location of the anti-tip
brackets matches the location of
the side brackets of the drawer.
Refer to 'Product dimensions' for
location of side brackets.
Secure the anti-tip brackets with
screws.
11