GET SX1 PRO 4T Manual page 9

INSTALLATION of SX1 CONNECT
1.
Install SX1 CONNECT in a
well-protected point on the
motorcycle. Secure it with
clamps if you want to install
it on the upper part of the
front fork.
2.
Connect the SX1 CONNECT
connector to the unused
connector of the GL-264-AA
harness.
ATTENTION
•After installation, make sure that the wiring does not impede
the free movement of the handlebars in either direction or
interfere with the moving components of the motorcycle (for
example, the transmission) or inconvenience the rider (for
example, in the boot area).
•Consult the dedicated manual for a complete list of functions
and further details about SX1 CONNECT.
SX1 CONNECT
9
HARNESS
GL-264-AA
EN