Advertisement
Wo
a tcisle.
j
BASS control switches
Use to adjust the low-frequency level. Press the + switch to increase
low-frequency level, and the — switch to decrease it.
The TONE indicator appears on the display section.
When both switches (+, —) of the BASS control are pressed simul-
taneously, the bass response will be set to the flat (normal) condition.
@) TREBLE control switches
Use to adjust the high-frequency level. Press the + switch to increase
high-frequency level, and the ~— switch to decrease it.
The TONE indicator appears on the display section.
When both switches (+, —) of the TREBLE control are pressed simul-
taneously, the treble response will be set to the flat (normal) condition.
@) Audio/Video INPUT SELECTOR switches
VCR1:
Press when performing playback on a VCR unit.
VCR2:
Press when performing playback on a second VCR unit.
VDP/CDV:
Press when performing playback on a video disc player
{VDP} or CDV player.
TAPE1/DAT1:
Press when performing playback on a DAT or tape
deck.
TAPE2/DAT2 MONITOR:
Press when performing playback on a sec-
ond tape deck or second DAT and when
monitoring recording.
CD: Press when playing compact discs on a CD player.
TUNER: Press when listening to radio broadcasts.
PHONO: Press when playing records on turntable.
@) MEMORY
SCAN switch
Operates when the INPUT SELECTOR is set to TUNER. Station frequen-
cies assigned to the STATION CALL switches are tuned in, one after
another beginning with station no. 1, for approximately 5 seconds each.
The display section SCAN indicator will light. Press the switch again
and the tuner remains tuned in to the station playing when the switch
was pressed the second time.
Station frequencies not assigned station numbers in the memory are
skipped.
MEMORY switch
When the unit is in the frequency display mode, pressing this switch
will result in the memorization of the current broadcast band, recep-
tion frequency, and FM AUTO/MONO
mode.
This switch is also used to input station names.
BAND selector switches
FM: Press for FM reception.
AM: Press for AM reception.
STATION
CALL switches
Each preset can hold any AM or FM station.
© These switches are used to preset and recall desired broadcasting
stations, FM AUTO/MONO
mode.
.
The rear panel STATION PRESET 10/30 switch determines the num-
ber of possible presets per STATION CALL switch.
10:
One per switch.
30: Three per switch.
If you press the
key:
¢ One time — station 2 is selected.
* Two times — station 12 is selected.
¢ Three times — station 22 is selected.
NOTE:
Pressing a BAND selector switch or STATION CALL switch will select
TUNER as the source, regardless of what other listening source or
function was selected.
{DISPLAY SECTION]
@ LEVEL/BALANCE display
@ INPUT SELECTOR
@ TV-ANT
indicator
Lights when TV mode is selected with the TV ANT switch.
(@) MUTING indicator
@® TAPE 2 indicator
'
Lights when
the INPUT SELECTOR
is set to TAPE
2 MONITOR
ON.
© STATION No. display
Shows the channel selected with the STATION CALL switch.
@ SCAN indicator
Lights during memory scan operation.
TUNED indicator
Lights when a station is tuned in during TUNER operation.
Lights when a stereo FM broadcast is being received.
@ Frequency display
@ Surround made indicators
@ DELAY TIME display
Shows the delay time during surround operation.
54
VIDEO SIGNAL SELECTOR indicators
Shows the video component selected with the VIDEO SIGNAL SELEC-
TOR switch.
(@) ENHANCER indicator
Lights when the video enhancer is on.
SIMULATED STEREO indicator
@ VCR NOISE FILTER indicator
Lights when the VCR NOISE FILTER switch is in the ON position.
MANUAL TUNING indicator
This indicator lights when in the manual tuning mode.
DIRECT TUNING indicator
This indicator lights when in the direct access-tuning mode.
AUTO TUNING indicator
This indicator lights when in the auto tuning mode.
@) SLEEP timer indicators
Shows the SLEEP timer setting (the length of time from the set time
to the point at which power will switch off). (The sleep timer can be
operated via the remote control.)
@ MEMORY indicator
@ TONE level meter
Shows the settings of the BASS and TREBLE switches.
ACOUSTIC
display
Shows the setting of the ACOUSTIC SELECT switch.
Advertisement
