Advertisement
© When using two pairs of speakers:
Select @ as the selector switch position and use speakers having
impedance of 8 ohms or more.
NOTE:
Turn off the receiver's power before changing the impedance selector
switch setting.
@ INPUT jacks
PHONO ..... connect to the output cables from a turntable.
CD iatescicd connect to the output jacks of a compact disk player.
(3 TAPE1/DAT1
jacks
Use these to connect TAPE DECK 1 or DAT (digital audio tape deck) 1.
Connecting for Recording
The tape recording jack (TAPE REC) on the tape deck or DAT should
be connected to the REC side of the TAPE1/DAT 1 jack on the receiver
with a pin plug connecting cord.
Connacting for Playback
¢
Connect the TAPE PLAY jack on the tape deck or DAT to the PLAY
side of the TAPE1/DAT1 jack on the receiver with a pin plug connect-
ing cord.
TAPE2/DAT2 jacks
Connect a second tape deck or second DAT to these jacks.
Connecting for Recording
The tape recording jack (TAPE REC) on the tape deck should be con-
nected to the REC side of the TAPE2/DAT2 jack on the receiver with
a pin plug connecting cord.
Connecting for Playback
Connect the TAPE PLAY jack on the tape deck to the PLAY side of the
TAPE2/DAT2 jack on the receiver with a pin plug connecting cord.
@® FRONT PRE-AMP OUT jacks
When a separate power ampifier is used to drive the front speakers,
connact the power amplifier to these jacks.
FRONT POWER AMP IN jacks
~~
=
7
When a separate pre-amplifier is connected and this unit is used as pow-
er amplifier, connect the pre-arnplifier to these jacks.
@ VDP/CDV jacks
(VIDEO IN}
When watching the video image from a LD player (VDP) or a CDV player,
connect its VIDEO OUTPUT jacks here.
{AUDIO IN (L,R)]
When playing back the audio channel from a LD player (VDP) or a CDV
player, connect its AUDIO OUTPUT jacks here.
VCR1 jacks
(VIDEO OUT]
When copying program material from the video component connect-
ed to the VCR2 or VDP/CDV jacks, connect to the VIDEO INPUT jacks
of the VCR used for recording.
[AUDIO OUT (L.R)]
When copying program materia! from the video component connect-
ed to the VCR2 or VDP/CDV jacks, or when recording music from an
audio component source, connect to the AUDIO INPUT jacks of the VCR
used for recording.
[VIDEO IN}
When monitoring the video image from a VCR used for playing, con-
nect its VIDEO OUTPUT
- jacks here.
WE-> Cistcie|e
{AUDIO IN (L, R)]
When monitoring back the audio channnel from a VCR used for play-
ing, connect its AUDIO OUTPUT jacks here.
VCR2 jacks
[VIDEO OUT]
When copying program material from the video component connect-
ed to the VCR1 or VDP/CDV jacks, connect to the VIDEO INPUT jacks
of the VCR used for recording.
{AUDIO OUT (L,R)}
When copying program materials from the video component connect-
ed to the VCR1 or VDP/CDV jacks, or when recording music from an
audio component source, connect to the AUDIO INPUT jacks of the VCR
used for recording.
[VIDEO IN]
When monitoring the video image from a VCR used for copying, con-
nect its VIDEO OUTPUT jacks here.
[AUDIO IN (L, R)}
When monitoring the audio channnel from a VCR used for copying, con-
nect its AUDIO OUTPUT jacks here.
Power cord
57
Advertisement
