Table of Contents
Advertisement
PT-PR01G
GND Terminal
Caution：
We recommend to use Cat5 or higher UTP/STP cable s for
!
100Base-TX Ethernet；
We recommend to use Cat5e or above UTP/STP cables for
1000Base-T Ethernet.
We recommend to use Cat6 or above UTP/STP cables for
2.5/5/10G Ethernet.
2.4 Caution
1.This device is for indoor use only. If you need to use it outdoors, please use it
with a waterproof case.
2.Please use Cat 6 or ethernet cables with shielding.
3.Grounding is required when using.
4.It is recommended to place the device in close proximity to the protected
equipmentwith a distance of ≤50cm.
Vertical installation is also recommended with a tilt angle not exceeding 50°.
5.Please install the device on a wall or metal back panel. Do not use a
wooden back panel to prevent the risk of fire.
Switch
≤50cm
2-1
≤
50cm
Device Connection
PD
PT-PR01G
GND Terminal
Installation
05
Advertisement
Table of Contents
