3.2 Inspection
Inspect the installed equipment before putting it into operation:
· Make sure the PD connected can work normal.
· Make sure the Ethernet cable connection is correct.
· Make sure the Grounding is correct.
!
3.3 Grounding
PROCET Single port PoE surge protector PT-PR01G-10 has the following
grounding solutions for reference
during construction:
If the installation is in the computer room, it can be connected to the
dedicated grounding busbar in the room.The grounding busbar is a
connecting conductor between the grounding bodies of the building,
such as flat iron, flat steel, nanomaterial conductors, copper-clad steel,
etc. Pls refer to the figure 3-3.
08
Installation
Caution:
Waterproof Ethernet cables should be with a
protective sheath. CAT6 cables are recommended.
GND Terminal
3-3
Grounding
2.5 Scre
w
Grounding Busbar