2. I
nstallation
2.1 Packing Contents
Open the box of the PT-PR01G-10 and carefully
unpack it, the box should contain the following items:
PT-PR01G
2.2 Installation Toolkits
These tools may be needed during equipment installation, and should be
prepared by yourself: level ruler, marking pen, craft knife, wire stripper,
network pliers, impact drill,different matching drilbits, rubber hammer,
cross screwdriver, wrench, ladder, etc.
2.3 Inspection
Connect the PT-PR01G-10 with the protected device, and check if the
terminal device work normally.
04
Installation
O perating Manual
Ground
lug Wire& M6
screw