Advertisement
Elvari™ Recessed Soap Dispenser (Manual) – 6B1 Series
Soap Dispenser Operation
Refilling the Soap Tank
1. Slide the soap tank (with pump attached) forward, remove the cap, and refill with soap.
2. Reattach the cap and ensure the air vent hole is open and the pump nozzle is not clogged.
3. Verify the outside of the soap tank is clean and that there are no leaks.
4. Reinstall the soap tank into the dispenser. Verify the pump is properly seated in the control box.
Cleaning and Maintenance
Cleaning Soap Dispenser Components
The soap tank, cap, level indication assembly, and soap pump require periodic cleaning to maintain proper function.
• Unlock and open the dispenser cover and then remove the components from the dispenser.
• Rinse the soap tank, cap, and level indication assembly using warm water.
• Add hot water to the soap tank (with the pump attached) and then activate the pump a minimum of 20 times to flush any
hardened soap residue from the inside of the pump.
Cleaning Stainless Steel
Scan or click the QR code below to view the Stainless Steel Washroom Accessories document.
4
Air Vent
Hole
Soap Tank
10/1/2023
Cap
Level
Indication
Assembly
Soap Pump
Bradley • P20-265 Rev. A: ECO 22-15-028
Installation & Maintenance
Advertisement
