Advertisement
Elvari™ Recessed Soap Dispenser (Manual) – 6B1 Series
Safety Information
The soap dispenser assembly is no stronger than the anchors and walls to which it is attached, and therefore, must be firmly
secured in order to support meet regulatory requirements. To avoid potential injury, the building owner or maintenance personnel
should remove the dispenser assembly from service if the mounting is not adequately secured to the wall or if there are any
observed product defects.
Read this entire installation manual to ensure proper installation. When installation is complete, file this manual with the owner or
maintenance department. Compliance and conformity to local codes and ordinances is the responsibility of the installer.
Separate parts from packaging and make sure all parts are accounted for before discarding any packaging material. If any parts
are missing, do not begin installation until you obtain the missing parts.
Dimensions
2-1/2" (64)
3-1/2"
(89)
13/16"
12-3/16"
(310)
14-5/16"
(363)
2
5" (128)
1/2"
(13)
4-5/16"
(21)
7" (178)
10/1/2023
WARNING
IMPORTANT
(110)
3" (76)
Low-Level
Indicator
BradLock
System
Dispenser
Lever
Installation & Maintenance
1-1/4"
(32)
6"
(153)
8-3/4"
(222)
16-5/8"
(423)
Bradley • P20-265 Rev. A: ECO 22-15-028
(mm)
Advertisement
