Led Light Status - Sabrent DS-UFNC User Manual

DS-UFNC / USER MANUAL

LED light status

1 2 3
1. Power light - blue. Always on when the power is on.
2. Clone progress indicator - blue, with four sections. Each section indicates 25% progress of the
cloning process with all four lit upon 100% completion.
3. SATA and M.2 drive lights - blue, and independent. Will be lit when a drive is inserted. Will flash
during read/write access. The light will turn off automatically for sleep mode after 30 minutes of
idling.
Note: If the destination drive is smaller than the cloned source drive the clone progress indicator
will fill and an error will be reported with two flashes.
3