Usb 3.0 to sata dual bay external hard drive docking station with built-in cooling fan (11 pages)
Summary of Contents for Sabrent DS-RICA
Page 1
SABRENT USB 3.0 Docking Station Attach peripheral devices to your desktop, notebook or tablet simultaneously via USB 3.0 cable almost effortlessly. Getting Started / Initial Setup WINDOWS OS:...
Page 2
1. Connect the power cord to the power jack on the Docking Station. 2. Plug the other end of the power cord to a power outlet.
Page 3
Note: At This point you can utilize your Docking Station as a standalone charging station by attaching devices to one of the charging ports. 3. Included is a 3.0 data cable that needs to be attached to the USB 3.0 type B female port on the Docking Stations.
Page 4
4. Connect the other end of the 3.0 cable to an available USB port on your PC or tablet. Note: You can attach the Docking Station to available 2.0 ports however for best performance use 3.0. Note: Docking Station is plug & play although we do strongly recommend installing the latest display drivers by visiting http://displaylink.com/support/downloads.php 5.
Page 5
6. USB data ports should now be ready to use. Note: 3.0 ports are labeled in blue. 7. Attach your sound devices to the sound card on the Docking Station with ease. Note: You might need to disable your onboard sound card or set USB audio to default on your sound settings.
Page 6
8. Connect Ethernet cable coming from your router or modem to the network port on the Docking Station for a Wired Network Connection. Note: If issues arise, you should try powering off your router and modem for 30 seconds then powering them back up with network cable connected to the Docking Station.
Page 7
MAC OS: 1. Please follow steps 1-4 on Windows OS Initial Setup. 2. You will have to install the driver from the disk or by visiting http://displaylink.com/support/downloads.php 3. Go through the setup, once finished restart your computer. 4. Refer to steps 6-9 on Windows OS Initial Setup.